WASTEK electrical panel with microprocessor for 1 and 2 single-phase or three-phase electric pumps. 
The ideal system for managing and maintaining your electric pump, thanks to the dedicated app. Practical and versatile, it saves installation time and reduces maintenance costs.

General features
• Power supply 1~230Vac 50/60Hz +/-10% (WASTEK-Mono);
• Power supply 3~400Vac 50/60Hz +/-10% (WASTEK-Tri);
• Language setting: Italian, English, Spanish, German, French;
• Long range electronic transformer (single phase 100-240Vac; three phase 310-450Vac);
• Ambient temperature: -5/+40°C;
• Relative humidity 50% at 40°C (non-condensing);
• Motor click input;
• Unipolar level probe input or float for minimum level;
• Normally open input for motor activation;
• Normally open input for high level alarm activation;
• Input for pressure level sensor (accurate to the centimeter of water – visible up to 1 meter);
• Dry contact cumulative alarm output (NC-C-NO) resistive load – 5A / 250V);
• Capacitor arrangement for single-phase version;
• AC3 circuit breaker (three-phase version);
• Large LCD display with Latin alphabet characters, green backlight;
• Auto-0-manual mode selector switch (unstable);
• Forced motor activation in manual mode;
• Operation in safety mode for environments with an explosive atmosphere;
• "Service Mode" operation for unlocking parameters during maintenance;
• Electronic control of the current absorbed by the motor for thermal intervention (2 current transformers for greater precision on the three-phase model);
• Sequence control and phase failure with relative alarm;
• Adjustable pump activation and switch-off delay;
No load alarm;
• Digital ammeter and voltmeter on the display;
• Alarm history: all active alarms remain in memory until they are reset or the ignition is switched off;
• All settings and parameters are retained even after the ignition is switched off;
• Protection with fuse in the panel (only for single-phase model);
• Possibility to set minimum and maximum supply voltage for alarm;
• IP55 ABS housing