Smart Evo 1
The most complete switchboard for pump and drainage systems ever

SMART EVO 1 is Elentek's best selling electrical panel as it is suitable for multiple applications for both clean water (emptying, filling, pressurizing) and dirty water (emptying and disposing of wastewater) systems.
Compact, economical and easy to install and use.

General features
• Single phase power supply 100-240Vac 50/60Hz (SMART EVO-Mono);
• Power supply 3F 310-450Vac 50/60Hz (SMART EVO-Tri);
• G/P1 input normally open;
• T1 input for motor click;
• 3 inputs for unipolar level probes (COM-MIN-MAX);
• GA input normally open for alarm activation;
• AUTOMATIC-0-MANUAL buttons (unstable);
• DIP-SWITCH switches for:
enable level alarm of probes;
thermal intervention delay 5/10 seconds;
alarm output setting;
motor click alarm reset enable;
filling/emptying;
enable start/stop floats;
enable card activation delay from network return.
• Self-test against jamming (2 sec. every 48 hours);
• Green LED for mains on/off or incorrect phase sequence;
• Automatic green LED installed;
• Motor active green LED;
• Red LED level alarm from probes or GA input;
• Red LED alarm motor overload / minimum current alarm;
• Motor click activation alarm red led.
• Maximum current electronic control for overload with assisted calibration;
• Minimum current electronic control for dry running with assisted calibration;
• Automatic reset for minimum current alarm;
• Enable return motor delay timer;
• Auxiliary and motor protection with fuses;
• Cumulative dry contact alarm output (COM-NO-NC resistive load - 5A / 250V);
• Cumulative voltage alarm output (12Vdc/ 100mA);
• Door lock main switch;
• Arrangement for running capacitors for single-phase version (not included);
• ABS housing, IP55;
• Ambient temperature: -5/+40 °C;
• Relative humidity 50% at 40°C (non-condensing).